How about anti-bend WPC deep embossed deck
Nowadays, the interior and exterior decoration will always consume a lot of time and energy. Even though there are various imperfections in the decoration process, the best way for the fitter is to have a problem before the problem arises. To do a good job of preventive measures, only in this way can the anti-bend WPC deep embossed deck be used longer. One of the special points to note here is how to avoid the problem of bending to the common wooden floor. If you use our WPC deep embossed deck, you just need to do a little maintenance for avoid bending.
How we make this kind of decking
In the face of these complex situations, how to avoid bending the decking? In fact, the WPC deep embossed deck is a kind of new eco-friendly landscaping material which is produced under high temperature and pressure from the mixture of HDPE and wood fiber. The cause of the deformation may be that the raw material of the base material is a miscellaneous wood, and an asymmetrical stress is formed on both sides of the center layer of the base material, resulting in bending and twisting of the wooden floor. Therefore, when choosing raw materials, it is necessary to choose the tree species with the same proportion and material as the wood. Just like the anti-bend WPC deep embossed deck, it’s made of recycled wood plastic materials with is from wood fiber and recycled waste plastic and be good with our living environment.
Why we need this WPC deep embossed deck
Another situation is the moisture content of the composite board. Generally, in the case where the moisture content of the board is large, the distribution of the moisture content of the various parts of the finished substrate is not uniform after passing through the coating and hot pressing. But once the moisture content is rebalanced, it will be bent. So you need this anti-bend WPC deep embossed deck which is also moisture resistance. This one is best to balance the moisture content before hot pressing.